New Orleans - (504) 467-7663

Baton Rouge - (225) 450-6425


2018 TAKEUCHI TL6R at www.questequip.com2018 TAKEUCHI TL6R at
2018 TAKEUCHI TL6R at www.questequip.com2018 TAKEUCHI TL6R at

For Sale Price:Call


The TL6R features a radial lift loader design and meets all current emission standards. With a height of 6 ft 5.8 in and a width of just over 5 ft the dimensions of the TL6R allow it to excel on job sites that may have height and width restrictions. This track loader comes with a newly designed cabin with an overhead 5.7” color multi-informational display and backlit rocker switches that control a variety of machine functions. The TL6R comes standard with a quiet track design with flotation pads that reduces vibration, noise levels, and improves ride quality.

Powerful Drives – Double reduction planetary drives provide exceptional pushing power, delivering maneuverability, outstanding performance, and the standard two speed travel allows for increased travel speeds.

Dual Flow Auxiliary Hydraulics – Features multiple attachments presets and the ability to change hydraulic flow within the 5.7′ monitor display.

Active Power Control – Maintains engine power for optimal performance, and it may be engaged or disengaged by the operator.

Quiet Ride Track – Allows rollers to ride on a rubber contact pad for reduced vibration and a quieter ride, and the wide block tread improves flotation.

Radial Lift Loader – Is designed to deliver excellent mid-height reach and unmatched performance in the toughest applications.

Total Package – Outstanding operating capacity coupled with tremendous breakout force allow you to get the job done more efficiently.

Built to Last – The heavy duty rear door is built to protect the radiator and hydraulic oil cooler from rear impacts, and will provide years of service and dependability.

Purpose Built Frame – Features multiple cross members for greater strength and rigidity.

Model Specific Oversized Undercarriage Components – For long lasting durability. TL6R features double and triple flange track rollers for less susceptibility to detracking.

Rear Bumper with Tie Downs – Delivers greater protection to the rear of the machine and simplifies anchoring the machine for transport.

High Capacity Cooling Module – Enables machine to run cooler and more efficiently for improved component life and attachment efficiency.

Heavy Duty Cross Member – Provides strength and rigidity throughout the loader arm and a low threshold for easy entry/exit and excellent visibility to the attachment.

Pilot Joystick Controls – Respond immediately to operator input for greater control and performance, and they are low effort for excellent comfort.

Rear View Camera- Allows operator full view of the rear of the machine on the in cab 5.7″ color display. Along with a large panoramic rear view mirror for enhanced visibility to the rear of the machine.

Color Multi-Informational Display – Features a 5.7 full color display that provides the operator with pertinent machine information, allows the operator to adjust hydraulic flow from the seat, and has a wide range of attachment presets that can be set-up.

Cabin – Features a larger cab, greater functionality, convenient rocker switch layout, 12v accessory outlet, and multiple cup holders.

Deluxe Suspension Seat – Allows the operator to remain comfortable through out the workday by providing a wide array of settings that include adjustments for height which also improves attachment visibility.

U.S. EPA Final Tier 4 Emission Compliant
DOC+DPF Exhaust After Treatment
Active Power Control Power Management System
Working Modes - Power and ECO
Automatic Fuel Bleed System
High Capacity Radiator and Hydraulic Oil Cooler Mounted Side-by-Side on Swing Out Frame
Dual Element Air Filter

Multi-Informational Display
Sealed Rocker Switches
12 volt System with 60 amp Alternator
Work Lights, Front and Rear
Engine Preheat
Hour Meter
Back-up Alarm

Permanently Sealed Track Rollers with Metal Face Seals
Double and Triple Flange Track Rollers
Fully Welded Frame with Integrated Cross Members
Front and Rear Tie-Down and Lift Points
Integrated Rear Bumper
2 Speed Travel
12.6" Quiet Ride Track Design

Tilt-up Operator's Station
Deluxe Adjustable Suspension Seat
Rear Pivoting Seat Bar with Integrated Arm Rest
ROPS / FOPS Structure
Retractable 2" Seat Belt
Retractable 3" Seat Belt (optional)
3 Point Retractable Seat Belt (optional)
Pressurized Cab with Swing Out Door, A/C, Heat, Defrost and Front Wiper (optional)
AM/FM/MP3 Radio with NOAA Weatherband (optional)

Cushioned Boom Cylinders
Boom Float with Detent
Hydraulic Pilot Controls
Proportional Auxiliary Controls with Detent
Pressure Relieving 1/2" Flat Faced Coupler Body
14-Pin Connector
Hydraulic Self Leveling
Mechanical Quick Coupler (Canopy)
Hydraulic Quick Coupler - Cab - Standard Equipment
Hydraulic Quick Coupler - Canopy - optional
Primary Flow Auxiliary Hydraulics 18.4 gpm
High Flow Auxiliary Hydraulics 33 gpm (optional Cab Only)
Pattern Change Valve (ISO or H) (optional)

Operating Performance

Operating Weight - Canopy
7,485 lb (3,395 kg)
Operating Weight - Cab
7,780 lb (3,530 kg)
Tipping Load
5,269 lb (2,390 kg)
Rated Operating Capacity, SAE J818*
1,841 lb (835 kg)
Operating Load at 50% of Tipping Load
2,635 lb (1,195 kg)
Bucket Breakout Force
5,930 lb (2,690 kg)
Lift Arm Breakout Force
4,860 lb (2,205 kg)
Traction Force
8,655 lb (3,926 kg)
Ground Pressure - 15.7 in. Track
4.9 psi (33.5 kPa)
Ground Pressure - 12.6 in. Track
5.1 psi (34.8 kPa)
Travel Speed - Low
4.3 mph (7.0 km/hr)
Travel Speed - High
6.2 mph (10.0 km/hr)

Hydraulic System

Auxiliary Flow - Primary Circuit
17.8 gpm (67.4 Lpm)
Hydraulic System Pressure
2,988 psi (20.6 MPa)


Make / Model
Kubota / V2403-CR-TE4B
Engine Displacement
148.5 cu in (2.4 L)
Horsepower @ 2,700 rpm
65.2 hp (48.6 kW)
Maximum Torque @ 1,500 rpm
144.3 ft-lb (195.6 Nm)

Fluid Capacities

Engine Lubrication
7.6 qt (7.2 L)
Cooling System
14.0 qt (13.0 L)
Fuel Tank Capacity
20.0 gal (75.7 L)
Fuel Consumption (65% of Full Load)
2.69 gal/hr (10.2 L /hr)
Hydraulic Reservoir Capacity
7.9 gal (30.0 L)
Hydraulic System Capacity
13.5 gal (51.0 L)

Machine Dimensions

Max. Lift Height to Bucket Pin
9 ft 6.4 in (2,905 mm)
Dump Height Fully Raised
7 ft 5.6 in (2,275 mm)
Dump Reach Fully Raised
1 ft 10.0 in (560 mm)
Dump Angle
Rollback Angle
Track Ground Contact Length
4 ft 6.9 in (1,395 mm)
Machine Length
8 ft 9.9 in (2,689 mm)
Transport Length
10 ft 11.1 in (3,330 mm)
Transport Height
6 ft 5.8 in (1,975 mm)
Departure Angle
Clearance Circle with Bucket
6 ft 10.5 in (2,095 mm)
Clearance Circle without Bucket
4 ft 6.9 in (1,395 mm)
Clearance Circle Rear
4 ft 11.8 in (1,520 mm)
Track Width
12.6 in (320 mm)
Ground Clearance
9.1 in (230 mm)
Overall Width without Bucket
5 ft 0.2 in (1,530 mm)

General Comments

*Rated operating capacity of track loaders is rated according to SAE J818 at no more than 35% of the tipping load.