New Orleans - (504) 467-7663

Baton Rouge - (225) 450-6425

INVENTORY

2019 GENIE GTH1056 at www.questequip.com2019 GENIE GTH1056 at www.questequip.com
2019 GENIE GTH1056 at www.questequip.com2019 GENIE GTH1056 at www.questequip.com
2019 GENIE GTH1056 at www.questequip.com2019 GENIE GTH1056 at www.questequip.com
2019 GENIE GTH1056 at www.questequip.com2019 GENIE GTH1056 at www.questequip.com
2019 GENIE GTH1056 at www.questequip.com2019 GENIE GTH1056 at www.questequip.com
All
Photos
Videos

For Sale Price:Call

Description

The Genie® GTH™-1056 telehandler offers excellent lift capacity and a maximum forward reach 42 ft (12.8 m) to move heavy loads over obstacles. Powerful four-wheel drive and turbocharged diesel engine to handle even the toughest worksite conditions.

Overview
•Compact outside turning radius and excellent ground clearance
•Powershift transmission with three speeds forward and reverse
•Multi-function proportional joystick control for fast, precise positioning
•Frame-leveling chassis — pick up or place loads on up to 10˚ side slopes

Measurements
• 10,000 lb (4,536 kg) maximum lift capacity
• 56 ft 10 in (17.32 m) maximum lift height
• 42 ft (12.80 m) maximum reach

Productivity
• Full time 4WD
• 4WS
• Operator selectable front, crab, coordinated steering modes
• Frame leveling 10° side to side
• 4-speed forward and reverse powershift transmission
• Power assisted steering
• Inboard wet disc service brakes
• Wet disc spring applied parking brake
• 14 x 24 in 12-ply air-filled rough terrain tires
• Front axle differential lock
• Rear axle stabilization system
• Twin axle mounted stabilizers
• High efficiency/variable displacement hydraulic pump
• ROPS/FOPS canopy
• Single, multi-function, proportional joystick
• Machine level indicator
• Full gauge cluster with engine diagnostics
• 48 in carriage and pallet forks
• Boom angle indicator
• Retractable 3 in (7.6 cm) seatbelt
• Left front and rear tire fenders
• Reverse motion alarm
• Adjustable suspension seat
• Auxiliary hydraulic circuit (15 GPM)
• Genie manual Quick-Attach™ system
• Fenders (set of 4)
• Lift Shackle at boom tip

Ground Clearance: 22, Fuel Capacity: 35, Max Forward Reach: 504, Maximum Lift Height: 682, Shipping Height (inches): 102, Shipping Length (inches): 264, Shipping Weight: 30,000, Shipping Width (inches): 102, WheelBase: 128

Measurements

Maximum lift height
56 ft 10 in (17.32 m)
Maximum forward reach
42 ft (12.80 m)
Height, stowed
8 ft 6 in (2.59 m)
Length, stowed (without forks)
22 ft (6.71 m)
Width
8 ft 6 in (2.59 m)
Wheelbase
10 ft 8 in (3.25 m)
Ground clearance, center
1 ft 10 in (0.56 m)
Ground clearance, axle
1 ft 6 in (0.46 m)
Fork cross section
2.25 x 4 in (57 x 101 mm)

Productivity

Maximum lift capacity
10,000 lbs (4,536 kg)
Lift capacity at maximum height
4,000 lbs (1,814 kg)
Lift capacity at maximum reach
3,000 lbs (1,361 kg)
Drive speed
see engine manufacturer information
Boom up/down
13.5/12 sec
Boom extend/retract
16/15 sec
Frame leveling
10° side to side
Draw bar pull
28,800 lbs (13,063 kg)
Turning radius, outside (4WS)
13 ft 3 in (4.04 m)
Auxiliary hydraulic flow
2-15 gpm (7.6-56.8 lpm)
Auxiliary hydraulic pressure
3,200 psi (220 bar)
Tires, standard size
14 x 24 in, 12 ply

Power

Power source
Deutz TCD 3.6 L Tier 4i 121 HP (90.23 kW)* | Perkins 1204E Tier 4i 124 HP (92.47 kW) | Perkins 1104E Tier 3 124 HP (92.47 kW)**
Electrical system
System voltage 12 volt
Alternator
Alternator 95 amp
Battery
Battery 1000 CCA at 0°F (-18°C)
Hydraulic tank capacity
44 gal (166.6 L)
Hydraulic system capacity (w/tank)
55 gal (208.2 L)
Fuel tank capacity
35 gal (132.5 L)

Weight

Standard
30,000 lbs (13,608 kg)***

Standards Compliance

Standards Compliance
ANSI/ITSDF B56.6, CSA B335

General Comments

* Also available as Tier 3 in limited regions

** Availablity limited by region and country standards

*** Weight will vary depending on options and/or country standards.

**** Load ratings vary depending on attachment.

SITE HOSTED BY MACHINERYTRADER.COM

COPYRIGHT SANDHILLS PUBLISHING