New Orleans - (504) 467-7663

Baton Rouge - (225) 450-6425

INVENTORY

2019 GENIE GTH1256 at www.questequip.com2019 GENIE GTH1256 at www.questequip.com
2019 GENIE GTH1256 at www.questequip.com2019 GENIE GTH1256 at www.questequip.com
All
Photos
Videos

For Sale Price:Call

Description

The Genie® GTH™-1256 telehandler delivers productivity with a large lifting capacity, high reach and compact maneuverability. And, this telehandler is built to perform, featuring a military-grade chassis design, standard Genie Quick-Attach™ system and auxiliary hydraulics. The right-side mount engine and a rear-mounted boom support design offers exceptional operator visibility.

Overview
•Ideal lifting applications in construction, landscaping and agriculture
•Ideal for loading/unloading and moving/placing materials, as well as jobsite cleanup
•Proportional frame-leveling chassis — pick up or place loads on up to 7˚ side slopes
•Multi-function proportional joystick control for fast, precise load positioning
•Full-time 4WD and 4WS

Measurements
• 12,000 lbs (5,443 kg) maximum lift capacity
• 56 ft (17.07 m) maximum lift height
• 42 ft (12.80 m) maximum reach

Productivity
• Full time 4WD
• 4WS
• Operator selectable front, crab, coordinated steering modes
• 2-speed forward and reverse “Shift-on-fly” hydrostatic transmission
• Transmission inch valve, brake pedal actuated
• Proportional frame leveling 7° each side
• Power assisted steering
• Inboard wet disc service brakes
• Wet disc spring applied parking brake
• 17.5 x 25 in. air-filled rough terrain tires
• Front axle differential lock
• High efficiency/variable displacement hydraulic pump
• Auxiliary hydraulic circuit (15 GPM)
• ROPS/FOPS canopy
• Single, multi-function, proportional joystick
• Machine level indicator
• Full gauge cluster with engine diagnostics
• Right-side screen standard on open cab
• Adjustable suspension seat
• Genie manual Quick-Attach™ system
• Retractable 3 in (7.6 cm) seatbelt
• 60 in (1.52 m) carriage and pallet forks
• Boom angle indicator
• 10 micron hydraulic return filter
• 1,000 cold cranking amps at 0° F (-18° C)
• Reverse motion alarm
• Mirror-LH canopy mounted
• Mirror-RH chassis mounted
• Fenders (set of 4)
• Lift Shackle at boom tip
• Twin front stabilizers

Max Travel Speed Empty: 18, Ground Clearance: 15, Fuel Capacity: 47, Max Forward Reach: 504, Maximum Lift Height: 672, Shipping Height (inches): 105, Shipping Length (inches): 252, Shipping Weight: 36,675, Shipping Width (inches): 95, WheelBase: 138

Measurements

Maximum lift height
56 ft (17.07 m)
Maximum forward reach
42 ft (12.80 m)
Reach at maximum height
11 ft (3.35 m)
Height, stowed
8 ft 9 in (2.67 m)
Length, stowed (without forks)
21 ft (6.40 m)
Width
7 ft 11 in (2.42 m)
Wheelbase
11 ft 6 in (3.50 m)
Ground clearance, center
1 ft 3 in (0.38 m)
Ground clearance, axle
1 ft 3 in (0.38 m)
Fork cross section
2.4 x 5.9 in (60 x 150 mm)

Productivity

Maximum lift capacity
12,000 lbs (5,450 kg)
Lift capacity at maximum height
7,000 lbs (3,250 kg)
Lift capacity at maximum reach
3,500 lbs (1,588 kg)
Drive speed
18 mph (29 km/h)
Boom up/down
16/13 seconds (16/13 seconds)
Boom extend/retract
22/15 seconds (22/15 seconds)
Draw bar pull
22,500 lbs (10,206 kg)
Turning radius, outside (4WS)
11 ft 8 in (3.55 m)
Auxiliary hydraulic flow
2-15 gpm (7.57-56.8 lpm)
Auxiliary hydraulic pressure
3,335 psi (230 bar)
Tires, standard size
17.5 x 25 in. air filled 20PR

Power

Power source
Deutz TCD3.6 turbocharged diesel, T4f, 134hp (99kW)
Electrical system
System voltage 12 volt
Alternator
Perkins 1204E-E44TA - 120amps Deutz 4.1TCD - 150amps
Battery
1000 CCA at 0°F (-18°C)
Hydraulic tank capacity
48 gal (182 L)
Hydraulic system capacity (w/tank)
77 gal (290 L)
Fuel tank capacity
47 gal (180 L)

Weight

Standard
36,600 lbs (16,602 kg)*

Standards Compliance

Standards Compliance
ANSI/ITSDF B56.6, CSA B335

General Comments

* Weight will vary depending on options and/or country standards.

** Load ratings vary depending on attachment.

SITE HOSTED BY MACHINERYTRADER.COM

COPYRIGHT SANDHILLS PUBLISHING